Previous picture Next picture Close gallery

BE-TM3-VSW10S2 | Tesla Model 3 Aftermarket Subwoofer and Box Upgrade

In stock

• Custom Bass Enclosure for Tesla Model 3 2018-2021
• Powerful NVX VSW104v2 Subwoofer
• Hand-Laid Fiberglass Enclosure
• Fits In the Storage Cubby On the Left Side of the Trunk
• Add 500 Watts RMS of Bass to Your Tesla


Tesla Model 3 Aftermarket Subwoofer BOOST Box and Upgrade

Customized For Your Vehicle

Our BOOST enclosures were painstakingly designed by our in-house engineers to combat the lack of rich and deep bass commonly associated with the factory sound system. Whether you have a Tesla Model S or a Chevrolet Corvette C6 Coupe, you will get to experience bigger and better bass. Each of our enclosures come equipped with NVX’s top of the line subwoofers, so you know your enclosure will bring the noise.

Works With Your Vehicle

The NVX BOOST subwoofer enclosures work with what is already have in your car, especially with an aftermarket stereo. No need to purchase any other speakers, subwoofers, or other parts. You can buy either the BOOST package by itself or purchase the entire kit which includes an amplifier, amplifier wiring kit, and lineout converters.

Simple and Easy to Install

Our BOOST series of subwoofers offer a simple and seamless installation fitting in your trunk. Each one of our BOOST subwoofers comes with a step-by-step guide on how to install it. You can also check out our website for more information about your BOOST Subwoofer

Everything you Need to Install

As mentioned earlier, we offer the complete BOOST package for your DIY installation. Besides coming with a BOOST subwoofer enclosure designed for your vehicle, each package comes with our premium high powered amplifiers, a full wiring kit for the amplifier, and a line-out converter. With these tools in hand, you have everything you need to upgrade the bass in your vehicle. To learn more about how to install your own BOOST box, check out our video on the topic here.

Product Details:

  • PATENT PENDING Custom-designed bass enclosure for 2018-up (even thru 2021) Tesla Model 3 vehicles
  • Hand-laid fiberglass shell
  • Installs quickly and easily into the storage cubby on the left side of the trunk
  • 10" Dual 4 Ohm VS Series Subwoofer
  • Power Handling:
    • RMS: 500 Watts
    • Peak: 1500 Watts
  • Impedance: Dual 4 ohms
  • Pressed paper cone with woven fiber top
  • Woofer surround type
  • Custom high roll foam surround with nylon stitching
  • 2.5" high-temperature aluminum voice coil
  • 127oz. triple stacked ferrite magnet motor structure with protective rubber boot
  • Frequency response: 20-220 Hz
  • Sensitivity: 87dB
  • Complete amplified bass system package available here
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Installation Instructions

Check out our B.O.O.S.T. Install Guide for step-by-step installation instructions

*Professional Installation Recommended

Frequency Asked Questions:

1. Is this kit compatible with Model 3's with a factory sub? Yes, this kit is compatible with the Tesla Model 3's with a factory sub
2. Is this kit compatible with Model 3's without a factory sub?  Yes, this kit is compatible with Tesla Model 3's without a factory sub
3. Do you have more detailed instructions for the installation process? For information about the installation process, you can download the B. O. O. S. T. install guide above or you can check out our video on the process here.
4. Are there any reviews online about this sub?  The Subwoofer included is the NVX VSW104v2. There are hundreds of reviews available online and it is an incredibly accurate woofer that we engineered and have sold for years. You can check out the specs of this subwoofer here.
5. Where do you suggest tapping the signal for the sub?
At the factory amp or sub behind the right rear corner panel. If you do not have a  factory sub, then you will tap into the front right/left speaker. 
6. Is there a recommended power source? The power source for the subwoofer would of course be a 12V Amplifier. Our powered kit comes with the VADM1. You can use a different amp if you want, but we created it to be an all-inclusive package. The VADM1 is very efficient and puts on a very small load to the vehicle charging system. 
7. Does the subwoofer block the manual charge release cable? Is it easily removable if I need to access that charger release? Yes. In the (unlikely) event you needed to access that, then you would a) remove the upper panel (2 plastic clips), b) 10mm bolt that threads into the included jack nut which attaches the BOOST box into the car. It would take you less than 5 minutes. The only thing you would "need" to have is a 10mm socket w/ wrench (perhaps put in the glovebox) if that was a long-term "concern" of having access.

More Information
Manufacturer NVX
UPC 810021842660
Color Black
Item Returns This item can be returned

Write Your Own Review
You're reviewing:BE-TM3-VSW10S2 | Tesla Model 3 Aftermarket Subwoofer and Box Upgrade
Your Rating

Copyright © 2011-2020 111x7 Trading LLC, dba NVX - All Rights Reserved.