Skip to content
Early Black Friday Sale! Deals All Month Long!
Fall AudioFest Sale! Buy One, Get One 10% On Select Items!
NVX XCA2004 Competition 4-Channel Amplifier

Cut Through 150dB+ Bass: NVX XCA2004 Competition 4-Channel Amplifier Guide

The NVX XCA2004 4-Channel Competition Amplifier is the go-to choice if you need extreme high-voltage vocal and mid-bass volume to match heavy competition bass walls.

It delivers 1,400 RMS of power and is engineered specifically to balance massive competition subwoofer walls.

This full-range Class-D monster ensures your vocal stage and mid-bass drivers remain articulate, crisp, and loud even when competing against 150dB+ sub-bass systems.

NVX XCA2004

Who Is the NVX XCA2004 Competition 4-Channel Amplifier For?

The XCA2004 is designed for:

  • SPL Competitors & Demo Vehicle Builders: Installers running high-output pro audio door panels, chuchero boxes, or open-trunk speaker arrays that require hundreds of continuous watts per channel.
  • Pro Audio & Horn Compression Stage Tuners: Enthusiasts driving bullet tweeters, compression horns, and heavy-excursion mid-bass drivers that require wide-range bandpass crossovers up to 5 kHz.
  • Extreme Bridged 2-Channel Front Stage Builds: Installers who want to bridge channels to push 700W RMS x 2 into a pair of ultra-heavy pro audio woofers or tower arrays.

How Does the XCA2004 Compare vs. Broader NVX Amplifier Ecosystem?

Understanding how the XCA2004 fits within NVX’s amplifier lineup helps you choose the right driver engine for your stage goals:

  • XCA2004 vs. XQ-Series SQ Amplifiers (XQA16005): The XQ-Series is designed for audiophiles who want rich, studio-quality sound detail. The XCA2004 is built for pure, extreme volume that can blast music loudly without overheating the amplifier. 
  • XCA2004 vs. VAD Marine/Car Multi-Channels (VAD10004v2): VAD amplifiers are compact, water-resistant, and perfect for daily-driven cars, trucks, or boats. The XCA2004 is a larger, heavy-duty amplifier built strictly for high-power car audio competitions and demo rigs that need massive amounts of volume.

Why the XCA2004 Is a Great Choice for High-SPL & Pro Audio Builders

  • Korean PCB Engineering: Manufactured in South Korea using premium high-current MOSFETs, heavy copper PCB traces, and high-capacity internal capacitors for maximum voltage stability under heavy competition loads.
  • Massive 1,400W RMS Power Output: Outputs 350W x 4 @ 2 Ohms or 700W x 2 @ 4 Ohms bridged, ensuring your mid-bass drivers and high-frequency horns never run out of clean power headroom.
  • Heavy-Duty Thermal Dissipation: The thick aluminum heatsink chassis prevents thermal shutdown during extended demo sessions and high-temperature competition environments.

Balancing 150dB+ Bass Walls: High-Output Front Stage & Pro Audio

When a vehicle's subwoofer system approaches 150dB or higher, standard 50W–100W door amplifiers get completely drowned out by low-end sound pressure.

  • 350W RMS x 4 @ 2-Ohm Capability: Supplying 350 Watts of clean RMS power to each of four 2-Ohm pro audio door speakers ensures dialogue, guitar solos, and snare cracks cut through intense subwoofer rumble.
  • 700W RMS x 2 @ 4-Ohm Bridged Mode: Bridging the front and rear channels transforms the XCA2004 into a 1,400W RMS 2-channel powerhouse capable of driving large 8" or 10" pro audio mid-bass drivers to their mechanical limits.

Technical Specifications

Feature/Spec NVX XCA2004 Performance Specs
Amplifier Class Full-Range Class-D
Total RMS Power Output 1,400 Watts RMS
4-Ohm RMS Power Output 200W x 4 @ 4 Ohms
2-Ohm RMS Power Output 350W x 4 @ 2 Ohms
4-Ohm Bridged RMS Output 700W x 2 @ 4 Ohms
Crossover Filter Range Variable High-Pass/Low-Pass/Bandpass up to 5,000 Hz (5 kHz)
Frequency Response 10 Hz – 30 kHz
Dimensions (L x W x H) 14.17" x 8.85" x 2.36"

Precision Crossover Tuning for Pro Audio & Horn Tweeters

Extremely high-output pro audio setups demand specialized crossover filtering to prevent driver damage:

  • 5 kHz Variable High-Pass Filter (HPF): Onboard crossover filters scale up to 5,000 Hz. This allows you to set precise high-pass cutoffs for compression horns and bullet tweeters, blocking low mid-range frequencies that cause voice coils to overheat.
  • Full Bandpass Capability: Engage HPF and LPF simultaneously to create a dedicated bandpass window (e.g., 100 Hz to 4 kHz) for door-mounted mid-bass woofers, keeping them clear of sub-bass rumble and ultra-high treble.

Frequently Asked Questions

Is the NVX XCA2004 marine certified?

No. The XCA2004 is a competition-grade amplifier engineered for vehicle interiors, trunk builds, and closed demo rigs. For water-resistant marine and UTV setups, look to the NVX VAD Multi-Channel Series.

What gauge power wire should I use for the XCA2004?

Run 4-gauge 100% OFC (Oxygen-Free Copper) power and ground wire, such as the NVX XKIT44 or NVX XAPK4. Because the XCA2004 is built with direct 4 AWG power and ground terminals, true 4-gauge OFC wire provides a perfect fit without needing wire reducers, while delivering maximum current transfer to support its 1,400W RMS output.

Can I run 2-Ohm speakers in bridged mode on the XCA2004?

No. When bridging channels on the XCA2004, the minimum speaker load impedance is 4 Ohms. Running a 2-Ohm load in bridged mode will cause the amplifier to enter thermal protection.
Previous article NVX NMPS20 Buyer's Guide: The Ultimate Weatherproof Marine Receiver
Next article Unstoppable Competition Bass: NVX XC-Series Strappable Monoblock Guide