NVX XF-Series Speaker Upgrade Guide for 2014-Up Harley-Davidson Touring Models
There’s nothing quite like hitting the open road on a Harley-Davidson Touring motorcycle. Models from 2014 and newer are absolute highway legends, offering top-tier comfort and unmistakable style.
However, if you spend enough time cruising at highway speeds, you’ve probably noticed a glaring issue–the factory audio system simply can’t keep up.
Between the roar of the exhaust and the rush of the wind, your favorite playlists easily get lost in the noise.
If you’re tired of riding with a lackluster sound system, it’s time for an upgrade. Upgrading your motorcycle's audio doesn’t have to mean cutting apart your fairings or doing extensive custom fabrication.
NVX designed the XF-Series specifically for 2014-up Harley-Davidson Touring models, giving you a direct-fit, plug-and-play solution that brings your music to life.
Let's dive into everything you need to know about two of the most popular direct-fit replacement speakers for your bike.
Why the NVX XF-Series Makes a Great Fit for Your Harley
Motorcycle environments are tough on electronics. Speakers endure extreme temperature changes, constant vibrations, and plenty of moisture.
Factory speakers often feature cheap paper cones that distort at high volumes and deteriorate quickly when exposed to the elements.
The NVX XF-Series speakers eliminate these weak points. Because they’re designed specifically for the factory locations on 2014 and newer Harley-Davidson Touring models, they drop right into your existing speaker pods without any heavy modifications.
Furthermore, they feature a highly efficient 2-ohm impedance, allowing them to extract every ounce of power from your factory radio, providing an immediate volume boost even if you choose not to install an aftermarket amplifier.
Add in UV-resistant materials and waterproof voice coil seals, and you have an audio setup built for the elements.
Best Front Fairing Audio Upgrade: NVX XFHD6F
When you want your music front and center, the NVX XFHD6F 600W Peak (300W RMS) 6.5" XF-Series 2-Ohm Front Fairing Speakers are exactly what you need.
These 6.5-inch two-way coaxial speakers replace the muddy, low-output factory speakers sitting in your motorcycle's front fairing, bringing concert-level clarity to your cockpit.
Thanks to the 1-inch titanium dome tweeters, you’ll get crisp, sharp highs that effortlessly cut through wind noise.
The vented ferrite magnet motor structure keeps the speakers cool during long riding days, ensuring your music stays clear without thermal distortion.
Best Rear Tour-Pak Audio Upgrade: NVX XFHD6R
For riders with a Tour-Pak equipped on their Harley, upgrading the rear pods is crucial for creating an immersive, surround-sound experience for both you and your passenger.
The NVX XFHD6R 600W Peak (300W RMS) 6.5" XF-Series 2-Ohm Rear Tour-Pak Speakers act as the perfect companion to the front fairing models.
While they share the same impressive 300-watt RMS power handling and rugged build quality as the front speakers, the XFHD6R utilizes a highly compact neodymium magnet motor structure.
Neodymium is incredibly powerful but much smaller than traditional ferrite, which is necessary to fit inside the notoriously shallow rear Tour-Pak speaker pods without requiring spacers or modifications.
Take It to the Next Level: Perfect Product Pairings
While installing these speakers alone will provide a massive improvement over your factory system, true audio enthusiasts know that great speakers need great supporting gear.
To unlock the full potential of your new setup, consider adding these NVX products to your cart:
- NVX Micro Amplifiers: Since the XF-Series speakers can handle up to 150 watts RMS each, powering them with an aftermarket amp will deliver earth-shattering volume.
NVX’s V-Series micro or N-Series amplifiers are compact enough to tuck neatly inside your motorcycle's front fairing while delivering massive, clean power. - NVX Amp Wiring Kits: If you add an amplifier, don’t choke its performance with cheap wiring.
NVX 100% Oxygen-Free Copper (OFC) wiring kits ensure maximum current transfer, keeping your charging system happy and your amplifier running strong. - NVX Sound Damping: Applying NVX sound-dampening material inside the fairing and speaker pods will eliminate structural vibrations and dramatically improve mid-bass response.
FAQs
What is the difference between the front (XFHD6F) and rear (XFHD6R) speakers?
The main difference is the magnet structure. The front speakers use a standard ferrite magnet, which fits perfectly in the spacious front fairing.
The rear speakers utilize a premium neodymium magnet. This allows the rear speakers to have a much shallower mounting depth so they fit perfectly into the tighter Tour-Pak pods without clearance issues.
Do I need an aftermarket amplifier to run these speakers?
An aftermarket amplifier isn’t strictly required. Because these speakers feature a 2-ohm impedance, they’ll pull maximum available power from your factory Harley radio and sound great.
However, to truly utilize their 300W RMS capability and achieve highway-speed clarity, an aftermarket amplifier is highly recommended.
Can I install these myself at home?
Absolutely. If you have basic hand tools and feel comfortable removing your motorcycle's outer fairing and Tour-Pak grilles, this is a very straightforward, plug-and-play installation. The mounting holes line up directly with the factory locations.