Skip to content
Black Friday | 25% Off Sitewide | Add to Cart and Save!
Black Friday | 25% Off Sitewide | Add to Cart and Save!

2014-2019 Toyota Highlander Bass Package - Includes 10" 500W RMS Subwoofer, Custom Enclosure, Monoblock Amplifier, Line Out Converter and Complete Wiring Kit (PBK-TOYHIG3-VS102)

Sale Sale
Original price $701.99
Original price $701.99 - Original price $701.99
Original price $701.99
Current price $614.99
$614.99 - $614.99
Current price $614.99
Trust Badge 1
Trust Badge 2
Trust Badge 3
Trust Badge 4

BE-TOYHIG3-VS102

Product Details:

  • Custom-fit 10" Sealed Enclosure for 2014-2019 Toyota Highlander vehicles
  • Installs in the Driver's side of the trunk and sacrifices very little space
  • Power Handling: 500W RMS
  • Preloaded with a single VS102v2 Subwoofer
  • Enclosure constructed of hand-laid fiberglass
  • Carpeted to match the interior
  • Includes mounting hardware and installation instructions
  • Pressed paper cone
  • High roll foam surround
  • 2.5" high temperature aluminum voice coil
  • 127oz. triple stacked ferrite magnet
  • Frequency response: 20-220 Hz
  • Sensitivity: 87dB
  • Final Wired Impedance: 2 Ohm
  • 1-year Warranty from the Original Purchase Date

VADM1

Product Details:

  • Marine Certified Monoblock Class D Car Amplifier
  • Peak Power Rating: 1000 Watts
  • RMS Power Rating:
    • 4 ohms: 180 watts x 1 channel
    • 2 ohms: 320 watts x 1 channel
    • 1 ohm: 500 watts x 1 channel
  • Cutting-edge Micro Class D technology allows amplifiers to be extremely compact
  • LED power (blue) and protect (red) indicators
  • Conformal Coated Marine grade circuit board
  • Balanced Differential Inputs, to eliminate noise picked up by signal cables
  • Speaker-level (high-level) inputs
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Input sensitivity: 0.2V-5V
  • Variable low-pass filter (50-250 Hz)
  • Bass Boost: 0 - +18dB boost @ 45Hz
  • Frequency Range: 20 - 20KHz
  • Total Harmonic Distortion: <0.3%
  • CEA-2006 compliant amplifier
  • Dimensions: 6.8"L x 3.3"W x 1.5"H
  • 1-year Warranty from the Original Purchase Date

XLACA2X

Product Details:

  • Active 2-channel line output converter and line driver
  • Designed to work with factory and aftermarket audio systems
  • Speaker-level inputs handle up to 30V (225 watts RMS)
  • Low-level RCA inputs handle 150 mV - 2 Volts
  • RCA outputs Provide up to 9.5 Volts of output
  • Adjustable xBOOST corrects for bass roll-off
  • Auto turn-on via DC offset or Audio Detection
  • Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
  • 12 Volt turn-on output for aftermarket amplifiers
  • Selectable Ground Isolation switch to eliminate ground and alternator noise
  • Molex terminals for speaker signal and power
  • Wired remote bass level control included
  • LED Clip indicator
  • Total Harmonic Distortion: 0.001%
  • Signal to Noise: >105 dB
  • Frequency Response: 10-25,000 Hz
  • 1-year Warranty from the Original Purchase Date

XKIT82

Product Details:

  • 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
  • Designed for car audio systems up to 800 watts RMS
  • Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
  • Tinned conductors for corrosion resistance
  • Pre-installed black nylon mesh covering protects power wire from being damaged
  • Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high-powered systems
  • Pre-terminated seamless power and ground ring terminals provide reliable performance
  • Full Spec cables meet or exceed the American Wire Gauge standards
  • Strand Count: 735
  • CEA-2015 and BC5W2 Compliant
  • 1-year Warranty from the Original Purchase Date

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)