NDA501 1480W Total RMS N-Series Class-D 5-Channel Amplifier

Product Highlights:

Extreme Efficiency

The NVX NDA501 is a Class D amplifier utilizing a small but efficient MOSFET transistor. MOSFET amplifiers are designed to process digital signals with a lower power consumption. By using less power, MOSFET amplifiers lose less energy to heat dissipation. As a result, Class D amplifiers such as the NDA501, have a higher efficiency rate of 90% compared to their AB class counterparts that feature an efficiency rate of 50 to 70%.

User Control

The NVX NDA501 is equipped with a wired remote bass level control. This feature allows the user to conveniently make adjustments to the bass levels on a song-by-song basis without having to adjust the gain setting directly on the amplifier itself. The knob also allows the user to tune the bass level precisely to help ensure the highest sound quality possible is achieved.

Assured Quality

The NVX NDA501 is constructed to meet the highest quality standards. While other amplifiers on the market often inflate their specifications, the NDA501 is tested using the Consumer Electronics Association’s ratings test. This means that all specifications listed for the NDA501 are accurate for peace-of-mind. The NDA501 also uses threeway protection circuitry, protecting not only the amplifier, but the entire sound system from thermal, overload, and speaker shortages. This helps increase the longevity of the sound system as a whole.

Product Details:

• NVX N-Series NDA501
• Class D 2 ohms Stable 5-Channel Amplifier
• RMS Power Rating:
• 4 ohms: 80 watts x 4 channels + 310 watts x 1 channels
• 2 ohms: 120 watts x 4 channels + 500 watts x 1 channels
• Bridged: 240 watts x 2 channels @ 4 ohms + 500 watts x 1 channels @ 2 ohms
• Total power output: 1480 watts watts
• CEA-2006 Compliant Amplifier
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• Speaker-level (high-level) inputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Input sensitivity:
• Low level: 0.2V-6V
• Frequency Response: 10 - 50 kHz
• Total Harmonic Distortion (THD): 0.5%
• Signal to Noise Ratio: 90 dB
• Variable high-pass filter: 15 - 350 Hz, 24 dB/octave
• Variable low-pass filter: 35 - 350 Hz, 24 dB/octave
• Subsonic filter: 10 - 50 Hz , 24 dB/octave
• Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
• Fuse Rating: 40A x 3 
• 4 AWG gauge power and ground wiring are recommended for installation.
• Dimensions: 18.1"W x 7.8"L x 2.4"H
• 1-year Manufacturer's Warranty