NVX VSW102v2

Out of stock
10" VS-Series Subwoofer • Dual 2-ohm Voice Coil • RMS Range: 350 - 500 Watts • Non-Pressed Paper With Woven Carbon Fiber Top • High Excursion Foam Surround • Stamped Steel Basket • Single Nomex Spider

  Best Value!



JL Audio 10W1v3-4

JL Audio 10W1v3-2


RMS Power Rating

500W 500W


Daul 2 ohm Single 2 ohm

Frequency Response

20 - 200 Hz 25 - 250 Hz


87dB 83.9 dB

Dual Layer Voice Coil


CEA-2031 Compliant

Xmax 11 mm 11 mm

The NVX VSW102v2 Offers an Incredible Listening Experience

The NVX VS-Series is the perfect subwoofer solution. Designed from the ground up, the series utilizes excellent engineering found in the higher end NVX subwoofers. It features a non pressed treated paper cone with a custom tooled and optimized PP dust cap. Keeping the cone under control is a high-roll foam surround that is specially treated to give you maximum excursion. The VSW102V2 uses a 2.5" high-temperature aluminum voice coil that provides maximum current distribution and has a power handling range of 350-500 watts RMS. The subwoofer also features a shorting ring which is a conductive aluminum ring placed in the air gap between the pole piece and the voice coil former to reduce inductance, which in turn reduces distortion and allows the subwoofer to accurately play a higher part of the bass spectrum. All of these elements combined produce tight, deep and accurate bass that is sought after by bass-heads and audiophiles. If you are looking for an extremely well engineered subwoofer at an amazing price, the NVX VS-Series Subwoofers are the perfect choice!

The NVX VSW102v2 Offers an Incredible Listening Experience

CEA-2031 Compliant: All CEA-2031 compliant loudspeakers adopt the same testing and measurement methods so comparing them side by side is easy. Loudspeakers include car speakers and subwoofers. The Consumer Electronics Association created new testing and measurement methods for mobile loudspeaker systems that define test procedures for rating the performance and physical size of speakers. This is important because you can now compare different speakers on the same playing field. Any manufacturers who adopt the CEA-2031 logo product mark can be compared evenly to other speaker manufacturers with the same mark.

The NVX VSW102v2 Offers an Incredible Listening Experience

General Features:

    • 10" VS-Series Version 2 Dual 2-ohm Car Subwoofer
    • Power Handling:
      • Peak: 1000 watts
      • RMS: 350 - 500 watts
    • Aluminum Shorting Ring to prevent rises in inductance
    • Non Pressed Paper cone
    • High Roll Custom Blended Foam surround
    • Stamped Steel basket
    • Single Nomex Spider
    • 60oz Y30 High Energy Ferrite Magnet
    • Impedance: Dual 2 Ohms
    • Mounting depth: 5.00" (127 mm)
    • Cutout diameter: 9.15" (236 mm)
    • Mounting Diameter: 9.65" (245 mm)
    • Overall Diameter: 10.35" (263 mm)
    • Frequency Response: 20 - 200 Hz
    • Sensitivity: 87 dB (1W/M)
    • Xmax: 11mm
    • Sd: 33.00 cm²
    • Resonance Frequency (Fs): 30 Hz
    • Net Weight: 13.15 lbs (5.95 kg)
    • Recommended Ported Enclosure: 1.00ft³
    • Recommended Sealed Enclosure: 0.70ft³
    • Subwoofer grille sold separately - NV10GR
    • 1-year Manufacturer's Warranty

Priced Individually

More Information
Manufacturer NVX
Series Vs-Series
Color Black
Write Your Own Review
You're reviewing:NVX VSW102v2
Copyright © 2011-2020 NVX - All Rights Reserved.