2015-2023 Dodge Charger Bass Package - Includes 10" 500W RMS Subwoofer, Custom Enclosure, Monoblock Amplifier, Line Out Converter and Complete Wiring Kit (PBK-DODCHA-G7)
Sale
Original price
$641.99
Original price
$641.99
-
Original price
$641.99
Original price
$641.99
Current price
$534.99
$534.99
-
$534.99
Current price
$534.99
BE-DODCHA-G7
Product Details:
- Custom-fit 10" Sealed Enclosure for 2015-2023 Dodge Charger vehicles
- Installs in the passanger side of the trunk and sacrifices very little space
- Power Handling: 500W RMS
- Preloaded with a single VS102v2 Subwoofer
- Enclosure constructed of hand-laid fiberglass
- Carpeted to match the interior
- Includes mounting hardware and installation instructions
- Pressed paper cone
- High roll foam surround
- 2.5" high temperature aluminum voice coil
- 127oz. triple stacked ferrite magnet
- Frequency response: 20-220 Hz
- Sensitivity: 87dB
- Final Wired Impedance: 2 Ohm
-
1-year Warranty from the Original Purchase Date
VADM1
Product Details:
- Marine Certified Monoblock Class D Car Amplifier
- Peak Power Rating: 1000 Watts
- RMS Power Rating:
- 4 ohms: 180 watts x 1 channel
- 2 ohms: 320 watts x 1 channel
- 1 ohm: 500 watts x 1 channel
- Cutting-edge Micro Class D technology allows amplifiers to be extremely compact
- LED power (blue) and protect (red) indicators
- Conformal Coated Marine grade circuit board
- Balanced Differential Inputs, to eliminate noise picked up by signal cables
- Speaker-level (high-level) inputs
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Input sensitivity: 0.2V-5V
- Variable low-pass filter (50-250 Hz)
- Bass Boost: 0 - +18dB boost @ 45Hz
- Frequency Range: 20 - 20KHz
- Total Harmonic Distortion: <0.3%
- CEA-2006 compliant amplifier
- Dimensions: 6.8"L x 3.3"W x 1.5"H
- 1-year Warranty from the Original Purchase Date
XLACA2X
Product Details:
- Active 2-channel line output converter and line driver
- Designed to work with factory and aftermarket audio systems
- Speaker-level inputs handle up to 30V (225 watts RMS)
- Low-level RCA inputs handle 150 mV - 2 Volts
- RCA outputs Provide up to 9.5 Volts of output
- Adjustable xBOOST corrects for bass roll-off
- Auto turn-on via DC offset or Audio Detection
- Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
- 12 Volt turn-on output for aftermarket amplifiers
- Selectable Ground Isolation switch to eliminate ground and alternator noise
- Molex terminals for speaker signal and power
- Wired remote bass level control included
- LED Clip indicator
- Total Harmonic Distortion: 0.001%
- Signal to Noise: >105 dB
- Frequency Response: 10-25,000 Hz
- 1-year Warranty from the Original Purchase Date
XKIT82
Product Details:
- 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
- Designed for car audio systems up to 800 watts RMS
- Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
- Tinned conductors for corrosion resistance
- Pre-installed black nylon mesh covering protects power wire from being damaged
- Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high-powered systems
- Pre-terminated seamless power and ground ring terminals provide reliable performance
- Full Spec cables meet or exceed the American Wire Gauge standards
- Strand Count: 735
- CEA-2015 and BC5W2 Compliant
- 1-year Warranty from the Original Purchase Date