Skip to content
Black Friday | 25% Off Sitewide | Add to Cart and Save!
Black Friday | 25% Off Sitewide | Add to Cart and Save!

VADM2v2 600W RMS V-Series Micro Full-Range Class-D 2-Channel Amplifier (Marine Certified)

Sale Sale
Original price $203.99
Original price $203.99 - Original price $203.99
Original price $203.99
Current price $178.99
$178.99 - $178.99
Current price $178.99
Trust Badge 1
Trust Badge 2
Trust Badge 3
Trust Badge 4

Product Details:

  • V-Series Micro Class D 2 ohms Stable 2-Channel Amplifier
  • RMS Power Rating:
    • 4 ohms: 200 watts x 2 channel
    • 2 ohms: 300 watts x 2 channel
    • Bridged: 600 watts x 1 channel @ 4 ohms
  • Total power output: 600 watts
  • Conformal Coated Marine grade circuitboard
  • LED Power/Protect Light
  • Speaker-level (high-level) inputs
  • 4-way protection circuitry (thermal, overload, speaker short protection and DC offset)
  • Balanced differential inputs eliminate noise picked up by signal cables
  • Selectable crossover modes: FULL / HPF / LPF
  • Crossover Slope: 12dB/octave
  • Input sensitivity:
    • Low level and High level: 0.2 - 10 volts
  • Frequency Response: 20 - 20000 Hz
  • Total Harmonic Distortion (THD): <0.1%
  • Signal to Noise Ratio: >85 dB
  • Variable high-pass filter: 40 - 400 Hz
  • Variable low-pass filter: 40 - 400 Hz
  • 8 AWG gauge amplifier wiring kit is recommended for installation
  • Dimensions: 6.49" L x 3.3" W x 1.48" H
  • 1-year Warranty from the Original Purchase Date

Customer Reviews

Based on 35 reviews
86%
(30)
14%
(5)
0%
(0)
0%
(0)
0%
(0)
J
Justin Herron
Big sound tiny package

This worked out great to replace my stock BMW motorcycle amp.
What's smaller than the OEM but put off three times the power.

O
Orrin K.
Very nice amp with one very weird terminal connection

I bought the NVX VADM2 amp which is rated at 440w into 2 channels. Huge power for something this small. I have my doubts that it produces anywhere near this amount of power but it is certainly way more than I needed. The size and shape is what was most important to me. I had a small spot under my dash that I wanted in install an amp into and this amp fit the bill. It seems like a high quality product but I found one thing very strange. The terminal block that the speaker wires connect to has the screws that tighten down on the wire facing DOWN. So you must remove the end cap and then hook up the wires before it is installed in its location. After mounting, you can't get a screwdriver in there to tighten them. Weird design choice.

L
Leonard
Excellent product

Works great and small and easy to use and install.

m
man4moparman4mopar
What an awesome little amp!!

This amplifier is awesome and the price for it amazing. Installed it in my 2022 HD Road Glide setting the input to 5v while using a speaker level to input level converter till I could flash the GTS radio and fully set the input voltage and crossover. Once I flashed the GTS radio to a flatter EQ and lower output voltage I set the input voltage on the amp with radio playing a 1khz signal at full volume using a Oscilliscope to find when it clipped and backing off to a clean signal. Scope shows that at 28.1v which with a 4ohm speaker would be 197 watts, impressive! In the garage all tuned the speakers are clean and ear bleedingly loud. Have Polk 652 speakers installed and this amp woke them up big time! Highly recomend this awesome little class D amplifier from NVX!

T
Tommy GunTommy Gun
It's a speaker cooker!

The 440W 2ch Class D Sounds great and the reverse polarity protection works. Make sure your speakers can handle the power. I didn't and ended up smoking the 6.5in component speakers on FLHX while out on a ride.The amp does get pretty warm. I added a small fan in the fairing to help with air circulation.I got new speakers that can handle more power but can only turn it up half way. Even at half volume it's an impressive improvement over stock.