NVX SDBP40: 40 sq ft of Sound Damping Material
  Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

SDBP40: 40 sq ft Sound Damping (Bulk Pack)

$99.99
SKU: sdbp40_lc
Brand:
NVX
Weight:
37.00 LBS
Shipping:
Calculated at checkout
Qty

    Benefits of Sound Damping

    Sound damping material is key to reducing the rattles and shakes in your car. It effectively reduces the amount of road noise that is let in through the thin panels of your vehicle. It also lessens vibrations that are created by playing music through your speakers. It works by adding weight to the desired panel, which lowers the resonating frequency. You will notice by adding this material to your car, your sound system will likely get noticeably louder. If you have subwoofers, this is the perfect kit for your vehicle.With the SDBP40, rattles and vibrations will be a thing of the past. This kit contains a generous 40 square feet of sound dampening material, enough to easily cover the trunk and doors of most cars.

    Thicker Than the Competition

    NVX is one of the world's leading manufacturers of sound damping material, and is up to 30% thicker than the other brands. Don't pay ridiculous amounts of money to kill those rattles, when you can get everything you need from NVX for a fraction of the price. With the SDBP40 damping material, you will notice a higher quality sound from your system as well as a drastic reduction of road noise. With 40 square feet of material, you will have enough to cover all of those problem areas that have been bothering you for so long!

    Product Overview:

    • Ten 18" x 32" Pieces of Sound Dampening Material
    • 40 Square feet total
    • Complete sound damping kit for entire vehicle/car. Can be used for areas such as trunk, doors, roof and floor
    • Made from 100% Butyl Rubber
    • Eliminates road noise
    • Quiets vibrations
    • Increases sound quality and output of car audio system
    • Stops rattles
    • Increases SPL
    • Reduces heat
    • Easy to form aluminum conforms to desired area of vehicle with ease
    • Four step peel and stick design for easy installation
    • Up to 30% thicker than the leading competitors

     


     

    How to Install Sound Damping Properly

    Sound damping can be a very beneficial accessory to reduce noise and vibration. To take full advantage of this soundproofing, read these instructions carefully and follow them till the end. It’s important to familiarize yourself with all the details to install the sound damping correctly. Incorrect installation will result in less than desirable results.

    Step #1

    The first step is to decide which location in your car you want to insulate. These locations include the floorboards, roof, door panels, trunk or firewall. We recommend soundproofing all metal surfaces for maximum sound deadening performance. Next, refer to your vehicle’s service manual for information on how to dismantle the trimming panels. Be careful when removing the panels to avoid breaking the fixing clips.

    Step #2

    Once the trimming is dismantled, remove the remainder of the factory insulation if it is damaged. If it is still intact, there is no need to permanently remove it. Next, you need to properly clean, dry and degrease the prospective surface. Sound deadening won't adhere properly if applied to a wet or dirty surface. Use a metal surface cleaner or degreaser along with a dry, clean rag. Make sure to use gloves and apply the degreaser in a well-ventilated space.

    Step #3

    For this step, measure the prospective surface you are going to treat. To make things easier, make a template of the appropriate size on a large sheet of paper and then transfer it to the damping material. That will make it easier to install it more accurately and avoid wasting material. Use a utility knife to cut the desired shape and size. Be careful and use gloves to protect your hands.

    Step #4

    Place a sheet of sound damping to the surface without removing the protective film. If it covers the surface properly, you are ready to install it. Gradually remove the protective paper film as you apply it to the surface for better adhesion. Once on the surface, press it down firmly until it is set in place. Flatten it with your hands to avoid unnecessary air bubbles. Use a rolling tool like the NVX SDRLR1 to press the mat down to the metal surface. Go across the entire surface with the roller to ensure that the sheet is installed properly.

    Step #5

    Once all sound deadening is in place, simply reinstall all trim pieces and carpet back to its original placement. Now you are ready to enjoy higher sound quality with fewer vibrations.

    Installation Location:
    Entire car
    Material Thickness:
    0.091
    Total Amount of Material:
    40 square feet
    Material Use:
    Vibration Dampener

    Write your own product review

    1. Fantastic Product  star rating

      Posted by Mario B on 24th Jan 2020

      This is a fantastic product and the price is unbeatable! It is very dense for the thickness, conforms very easily (I recommend using a heat gun as you roll it for ease of install), very sticky and most of all it works! Installed in my 92 K1500 which was a complete rattle trap to say the least... The stereo would have everything in the truck flexing and rattling so bad I didnt even want to listen to it anymore... I applied to main problem areas (roof, inner door skins, rear wall of cab) and wow what a difference! Sounds so solid and very little exterior/road noise (and I have 3" exhaust and super 10 mufflers)... Will soon be re-installing the stereo equipment so I will update my review to let it be known the improvement there

    2. this product is better than any sound deading material out there  star rating

      Posted by Jason. on 25th Apr 2016

      Way more bang for the buck. You get way more than your money's worth. I can say I got more than I paid for. I used dynamat before and only did half of my trunk. I used NVX and did my whole trunk and had a lot left over.

    3. better than dynamat  star rating

      Posted by Unknown on 21st Apr 2016

      This is a great product that very worth the money. Hasn't been disappoint yet.

    4. Really Good Stuff  star rating

      Posted by Ryan McCafferty on 9th Apr 2016

      Just finished the trunk in my 07 police interceptor and the difference is unreal. Easy to use and much nicer than competitors. Will definitely buy more to finish all doors.

    5. 5 star product  star rating

      Posted by Unknown on 18th Mar 2016

      Best bang for the buck just as good if not better than other more expensive brands and the price can't be beat.

    6. KIller product  star rating

      Posted by David Paulson on 13th Jan 2016

      i have used many types of sound Deadening and this stuff is right up there on top love the fact it comes in the bigger sheets so cover larger area is so much easier i will buy it again next time i need more sound Deadening thats for sure

    1 year standard warranty. For more details please visit our warranty page

    Sign up for our newsletter

    View Cart Go To Checkout